Constructed using a 3-layer laminate cloth, the outer is constructed from tough polypropylene with a waterproof PVC coating, whilst the core features 5mm foam encased in a black polyester ‘scrim’.

The outer surface is very hard-wearing, whilst the foam has impact protection properties for minor knocks, and the inner scrim helps protect the foam from any damage.

Please note that the cover can still be used without the need to remove any connected cables.

The post Rhodes ‘Drop-Over’ Cover appeared first on Rhodes Music.

The post MK8 Flightcase appeared first on Rhodes Music.

Rhodes Official® tines have many benefits over our older tine designs including a tough anti-corrosion coating, carefully finished ends for optimum tine-to-pickup placement, exacting dimensions for perfect strike line every time, a perfected tine-to-block fit for optimum sustain and of course, the classic and impossible-to-emulate Rhodes tone by the bucket load.

Note: Tines are sent full length (170mm/6.7″). Refer to Tine Cutting Chart included in package. Suitable for all Rhodes and Fender Rhodes pianos.

2-3 week expected lead time from date of purchase. 

The post Tines appeared first on Rhodes Music.

A new pickup pole shape ensures all facets of tine vibration are collected and transmitted, whilst our new mounting plate allows much more flexible positioning within the piano on a per-note basis. Our precise winding process ensures a consistent number of winds and our pickup wire is protected to prevent breakage and corrosion.

Our engineers have also carefully selected and curated our pickups to produce beautiful saturation the closer they get to the tines, whilst simultaneously ensuring an unprecedented dynamic range.

Note: Compatible with all Rhodes and Fender Rhodes pianos.

The post Individual Pickup appeared first on Rhodes Music.

The benefit is that you can now have better optimised and reduced-noise damping in your MK1, 2, V, or 7.

The Damper Felt Kit (73) includes:
8-60 Bass
61-67 Mid
68-80 Treble

The Damper Felt Kit (88) includes:
1-60 Bass
61-67 Mid
68-88 Treble

Note: Best installed in conjunction with our new generation damper combs (post-1975 models only currently). Suitable for all Rhodes and Fender Rhodes. Comes with glue.

The post Damper Felt Kit + Glue appeared first on Rhodes Music.

These aerospace material combs can cope with heavy hammer strikes yet still dampen your tines on a dime.

The Damper Comb Set includes:
2x Bass
2x Mid
2x Treble
1x Single treble damper for note 73

Note: Suitable for post-1975 aluminium frame 73-note Rhodes pianos only. 

The post Damper Comb – Full Set appeared first on Rhodes Music.

The Hammer Tip Set (73) includes:
8-25 Clear
26-39 Red
40-58 Black
59-60 Pink
61-80 Blue

The Hammer Tip Set (88) includes:

1-25 Clear
26-39 Red
40-58 Black
59-60 Pink
61-88 Blue

Note: Suitable for all Rhodes and Fender Rhodes pianos. (Note that strike line and escapement must always be checked after hammer tip replacement). Comes with glue.

The post Hammer Tip Set + Glue appeared first on Rhodes Music.

Made from a super-tough material that allows un-impeded tonebar vibration but that keeps the tone bars tightly aligned to the pickups, these grommets also have a countersunk top and washer for the best fit (first introduced on the Rhodes MKV).

This keeps the tone bars nicely in place whilst keeping the action regulation (and therefore tone) top-notch at all times.

Never underestimate the effect of new Rhodes Official grommets on your Rhodes’ tone. Also included in the kit are new-sized screws and a different grommet design for the upper tone bars to bring out optimum long sustain in the treble end of your piano.

The Grommet, Screw and Washer Set (73) includes:
146x Grommets
146x Screws
146x Washers

The Grommet, Screw and Washer Set (88) includes:
176x Grommets
176x Screws
176x Washers

Note: Suitable for Fender Rhodes and Rhodes pianos.

The post Grommet, Screw and Washer Set appeared first on Rhodes Music.

Simply slide onto the tonebar, play the note and listen whilst sliding the clip to find the optimum sustain. Ideally, these should be installed with fresh grommets and screws for optimum results.

Note: Suitable for all Rhodes and Fender Rhodes pianos.

The post Tonebar Clip appeared first on Rhodes Music.

These are generally used on the front (keyboard side) screw only but be sure to try on both tone bar screws if the poor oscillation persists after installing one tine stabilisation spring on the front screw.

Note: Suitable for all Rhodes and Fender Rhodes pianos.

The post Tine Stabilisation Spring appeared first on Rhodes Music.